DO NOT CHANGE
4 megapixel Provision LED array kit: 6 dome security cameras with 4MP resolution in white outdoor metal housing, 8-channel 5 megapixel NVR recorder, 10 m LAN cable, 8+2 port switch, power supply and PoE connector. The security system is suitable for monitoring business premises, apartments and holiday homes in Full HD quality. The 6 dome camera IP system also allows monitoring of larger areas without signal loss.
Contents of the pre-assembled IP security camera system kit:
Easy to mount on walls and ceilings, with a metal housing, so it is also ideal for outdoor use.
The 4 megapixel resolution delivers sharp images both day and night.
Thanks to the built-in IR LEDs, it provides visibility up to 20 m even in complete darkness. The 2.8 mm lens offers a 107° field of view, allowing you to cover a larger area with a single camera.
The Provision PR-NVR5-8200XN(MM) recorder can manage up to 8 5 megapixel IP cameras. You can set up motion detection, scheduled or continuous recording modes. Connected to a monitor or TV, you can view live footage. It also supports remote internet access via mobile app or computer. For video storage, the unit must be expanded with a hard drive (NOT INCLUDED), with a maximum capacity of 6 TB.
If you purchase the hard drive from us, we will install it in the NVR free of charge.
The PoE switch is used to create the IP camera network. Connect the IP cameras and the NVR to it using the included cables.
Thanks to PoE, the cameras do not need a separate power supply, as they are powered directly from the switch.
There are 10 ports in total: 8 for the cameras, 1 for the router and 1 for the NVR.
The cables are delivered pre-terminated, so you only need to connect them to the NVR recorder and the camera. Each camera requires only one cable, as both video signal and power are transmitted over the same line.
If 10 m is not enough, you can choose longer cables: 15 m or 20 m.
Assign a unique IP address to each IP camera and to the NVR within your own IP address range (make sure that no two devices share the same IP address, as this can cause conflicts).
Connect the cameras and the NVR to the PoE switch.
In the NVR settings, add the cameras one by one using automatic search or by entering the IP addresses you have assigned, then save the configuration.
Your system is now ready to use.
Surveillance systems do not include built-in storage, so hard drives must be purchased separately (NOT INCLUDED). If you buy the HDD from us, we will install and initialize it in the device free of charge, so you do not need to worry about additional installation or extra cost.
1000 GB HDD for recording
Approximate storage time with continuous recording is about 1 week for 1 camera, and with motion detection enabled it can be up to around 2 months, depending on activity.
NOT INCLUDED
2000 GB HDD for recording
Approximate storage time with continuous recording is about 2 weeks for 1 camera, and with motion detection enabled it can be around 1–2 months, depending on activity.
Please also check our IP camera system category and choose from our ready-made kits.
