DO NOT CHANGE
4 megapixel Provision set with 1 large LED array: 7 dome security cameras with 4MP resolution, white outdoor metal housing, 8-channel 5 megapixel NVR recorder, 10 m LAN cable, 8+2 port switch, power supply and PoE connector. The security system is suitable for monitoring business premises, apartments and holiday homes in Full HD quality. The 7-dome camera IP system also allows monitoring of large areas without signal loss.
Contents of the pre-assembled IP security camera system kit:
Easy to mount on walls or ceilings, with a durable metal housing, making it ideal for outdoor use as well.
The 4 megapixel resolution provides sharp images both day and night.
Thanks to the built-in IR LEDs, the camera can see up to 20 meters in complete darkness. The 2.8 mm lens offers a 107° field of view, allowing you to monitor a wider area with a single camera.
The Provision PR-NVR5-8200XN(MM) NVR supports up to 8 5 megapixel IP cameras and allows you to set up motion-triggered, scheduled or continuous recording modes. Connected to a monitor or TV, you can view live footage. Remote internet access is available via mobile app and PC. To store recordings, you will need to add a hard drive (NOT INCLUDED), up to 6TB capacity.
If you purchase the hard drive from us, we will install it in the NVR free of charge.
The PoE switch is used to create the IP camera network. Connect the IP cameras and the NVR to the switch using the included cables.
Thanks to PoE, the cameras do not need separate power supplies – they are powered directly through the switch.
The switch has 10 ports in total: 8 for cameras, 1 for the router and 1 for connecting the NVR.
The cables are delivered fully terminated, so you only need to connect them to the NVR recorder and the cameras. Each camera requires only one cable, as both video signal and power are transmitted over the same line.
If 10 m is not enough, you can choose longer lengths: 15 m or 20 m.
Assign a unique IP address to each IP camera and to the NVR within your local IP address range (make sure no two devices share the same IP address to avoid conflicts).
Connect the cameras and the NVR to the PoE switch.
In the NVR settings, add each camera either via automatic search or by entering the previously assigned IP addresses, then save the configuration.
Your system is now ready for use.
Surveillance systems do not include built-in storage by default, so hard drives must be purchased separately / NOT INCLUDED / for the device. If you buy the HDD from us, we will install and configure it in the NVR at no extra cost.
1000 GB HDD for recording
Approximate storage capacity with continuous recording for 1 camera is about 1 week; with motion detection enabled it can be up to around 2 months, depending on activity.
NOT INCLUDED
2000 GB HDD for recording
Approximate storage capacity with continuous recording for 1 camera is about 2 weeks; with motion detection enabled it can be around 1–2 months, depending on activity.
Please also check our IP camera system category and browse our full range of kits.
