DO NOT CHANGE
4 megapixel Provision kit with 1 large LED array: 6 security cameras with 4MP resolution in white outdoor metal housing, 8-channel 5 megapixel NVR recorder, 10 m LAN cable, 5-port switch, power supply and PoE connector. This security system is ideal for monitoring business premises, apartments and holiday homes in Full HD quality. The 6-camera IP system also enables monitoring of large areas without signal loss.
Contents of the pre-assembled IP security camera system kit:
Can be easily mounted on walls and ceilings, and thanks to its metal housing it is perfectly suitable for outdoor use as well. The 4 megapixel resolution delivers sharp images both day and night. Thanks to the built-in IR LEDs it provides visibility up to 20 m even in complete darkness. The 2.8 mm lens offers a 107° field of view, allowing you to cover a larger area with a single camera.
The Provision PR-NVR5-8200XN(MM) recorder supports up to 8 5 megapixel IP cameras and allows you to set motion-triggered, cyclic or continuous recording modes. When connected to a monitor or TV you can view live footage. Remote internet access is available via mobile app and PC. To store recordings, the unit must be expanded with a hard drive (NOT INCLUDED), with a maximum capacity of 6 TB. If you purchase the hard drive from us, we will install it in the NVR free of charge.
The PoE switch is used to build the IP camera network. Connect the IP cameras and the NVR recorder to it using the supplied cables. Thanks to PoE functionality, the cameras do not need a separate power supply, as they are powered directly from the switch. It has a total of 10 ports: 8 for the cameras, 1 for the router and 1 for connecting the NVR.
The cable is delivered fully assembled, you only need to connect it to the NVR recorder and the camera. Each camera only needs 1 cable, as both the video signal and power are transmitted over a single line. If 10 m is not enough, you can choose longer cables: 15 m, 20 m or 25 m.
Surveillance systems do not include built-in storage, so hard drives must be purchased separately / NOT INCLUDED / for the device. If you buy the HDD from us, we will install and configure it in the unit free of charge, so you will not have any extra installation work or cost.
1000 GB HDD hard drive for recording
Approximate storage capacity with continuous recording is about 1 week for 1 camera, and with motion detection enabled it can be up to 2 months. NOT INCLUDED
2000 GB HDD hard drive for recording
Approximate storage capacity with continuous recording is about 2 weeks for 1 camera, and with motion detection enabled it can be around 1–2 months. NOT INCLUDED
Please also check our IP camera system category and browse our full range of kits.