DO NOT CHANGE
4 megapixel Provision kit with 1 large LED array: 8 dome security cameras with 4MP resolution in white outdoor metal housing, 8-channel 5 megapixel NVR recorder, 10 m LAN cable, 8+2 port switch, power supply and PoE connector. The security system is suitable for monitoring business premises, apartments and holiday homes in Full HD quality. The 8 dome camera IP system also allows you to monitor large areas without signal loss.
Contents of the pre-assembled IP security camera system kit:
Easy to mount on walls and ceilings, with a robust metal housing, so it is ideal for outdoor use as well.
The 4 megapixel resolution delivers sharp images both day and night.
Thanks to the built-in IR LED, it provides visibility up to 20 m even in complete darkness. The 2.8 mm lens offers a 107° field of view, allowing you to monitor a wider area with a single camera.
The Provision PR-NVR5-8200XN(MM) recorder supports up to 8 5 megapixel IP cameras. You can set up motion-triggered, scheduled or continuous recording modes. When connected to a monitor or TV you can view live footage. It also supports remote internet access via mobile app and PC. To store recordings, the NVR must be fitted with a hard drive (NOT INCLUDED), up to 6 TB capacity.
If you purchase the hard drive from us, we will install it in the NVR free of charge.
The PoE switch is used to create the IP camera network. Connect the IP cameras and the NVR to the switch using the supplied cables.
Thanks to PoE, the cameras do not need a separate power source, as the switch supplies power over the network cable.
There are 10 ports in total: 8 for cameras, 1 for the router and 1 for connecting the NVR.
The cables are delivered fully terminated, you only need to connect them to the NVR recorder and the cameras. Each camera requires just one cable, as both video signal and power are transmitted over the same line.
If 10 m is not enough, you can choose longer cables: 15 m or 20 m.
Assign a unique IP address to each IP camera and to the NVR within your local IP address range (make sure no two devices share the same IP address, as this will cause conflicts).
Connect the cameras and the NVR to the PoE switch.
In the NVR settings, add the cameras one by one using automatic search or by entering their IP addresses, then save the configuration.
The system is now ready for use.
Surveillance systems do not include built-in storage by default, so hard drives must be purchased separately / NOT INCLUDED with the device. If you buy the HDD from us, we will install and configure it in the NVR free of charge, so you do not need any additional assembly or setup.
1000 GB HDD for recording
Approximate storage time with continuous recording and 1 camera is about 1 week; with motion detection enabled, it can be up to around 2 months.
NOT INCLUDED
2000 GB HDD for recording
Approximate storage time with continuous recording and 1 camera is about 2 weeks; with motion detection enabled, it can be around 1–2 months.
Please also visit our IP camera system category and browse our full range of kits.
