DO NOT CHANGE
4 megapixel Provision kit with 1 high-power LED array: 3 dome security cameras with 4MP resolution in white outdoor metal housings, 4-channel 5MP NVR recorder, 10 m LAN cables, 4+2 port PoE switch. This security system is suitable for monitoring business premises, apartments and holiday homes in Full HD quality. The 3-dome camera IP system also allows you to monitor larger areas without signal loss.
Easy to mount on walls or ceilings, with a durable metal housing for reliable outdoor use.
The 4 megapixel resolution delivers sharp images both day and night.
Thanks to the built-in IR LEDs, the camera provides visibility up to 20 m in complete darkness. The 2.8 mm lens offers a 107° field of view, allowing you to cover a wide area with each camera.
The Provision PR-NVR5-4100X+(MM) recorder supports up to 4 5 megapixel IP cameras and offers motion‑detection, scheduled or continuous recording modes. Connect it to a monitor or TV to view live footage. Remote access via the internet is available through a mobile app and PC software. For video storage, a hard drive is required (not included), with support for up to 6 TB capacity.
If you purchase the hard drive from us, we will install it in the NVR free of charge.
The PoE switch is used to build the IP camera network. Connect the IP cameras and the NVR to the switch using the included cables.
Thanks to PoE, the cameras do not need separate power supplies – the switch powers them directly over the network cable.
The switch has 6 ports in total: 4 for the cameras, 1 for the router and 1 for the NVR.
The cables are delivered pre‑assembled – simply plug them into the NVR and the cameras. Each camera only needs one cable, as both video and power are transmitted over the same line.
If 10 m is not enough, you can choose longer cables: 15 m or 20 m.
Assign a unique IP address to each IP camera and to the recorder within your local IP range (make sure no two devices share the same IP address).
Connect the cameras and the recorder to the PoE switch.
In the recorder’s settings, add each camera using automatic search or by entering the assigned IP addresses, then save the configuration.
Your system is now ready to use.
The surveillance system does not include built‑in storage, so a separate hard drive is required (not included). If you purchase the HDD from us, we will install and configure it in the recorder at no extra cost.
With continuous recording, 1 camera can typically be stored for around 1 week; with motion‑detection recording, storage time can be significantly extended depending on activity.
Not included.
With continuous recording, 1 camera can typically be stored for around 2 weeks; with motion‑detection recording, storage time can be extended depending on activity.
Explore our IP camera system category and choose from a wide range of ready‑to‑use kits.
