DO NOT CHANGE
2 megapixel Provision kit with 1 large LED array: security cameras with FULL HD 1920x1080 resolution, white outdoor metal housings, 8‑channel 5 megapixel NVR recorder, 10 m LAN cables, 8+2 port PoE switch. The security system is suitable for monitoring sites, apartments and shops in Full HD quality. The 7 bullet‑camera IP system also allows monitoring of larger areas without signal loss.
Contents of the pre‑assembled IP security camera system kit:
Easy to mount on walls or ceilings, with a durable metal housing, so it is suitable for both outdoor and indoor use.
Thanks to the built‑in IR LEDs, the camera provides visibility up to 20 metres even in complete darkness. The 2.8 mm lens offers a 103° field of view, allowing you to cover a wider area.
The Provision PR-NVR5-8200X+(MM) recorder can handle up to 8 5 megapixel IP cameras, and supports motion‑detection, scheduled or continuous recording modes. Connected to a monitor or TV, you can view live footage. It also supports remote internet access via mobile app and PC. To store recordings, the unit must be expanded with a hard drive (NOT INCLUDED), with a maximum capacity of 6 TB.
If you purchase the hard drive from us, we will install it in the NVR free of charge.
The PoE switch is used to create the IP camera network; connect the IP cameras and the NVR recorder to it using the supplied cables.
Thanks to PoE, the cameras do not need a separate power supply, as they are powered directly from the switch.
The switch has 10 ports in total: 8 for the cameras, 1 for the router and 1 for connecting the NVR.
The cables are delivered pre‑assembled; simply connect them to the NVR recorder and the cameras. Each camera requires only one cable, as both video signal and power are transmitted over the same line. If 10 m is not sufficient, cable length can be upgraded to 15 m or 20 m.
Assign an IP address to each IP camera and to the recorder within your own IP address range (make sure no two devices share the same IP address, as this would cause a conflict).
Connect the cameras and the recorder to the switch, then plug the switch into a mains outlet using the supplied power adapters.
In the recorder settings, add the cameras one by one using automatic search or by entering the previously assigned IP addresses, then save the configuration.
The system is now ready for operation.
Surveillance systems do not include built‑in storage, so hard drives must be purchased separately (NOT INCLUDED). If you buy the HDD from us, we will install and configure it in the device free of charge, so you do not incur additional installation work or cost.
1000 GB HDD hard drive for recording
Approximate storage time with continuous recording for 1 camera is about 1 week; with motion detection enabled it can be up to around 2 months, depending on activity.
NOT INCLUDED
2000 GB HDD hard drive for recording
Approximate storage time with continuous recording for 1 camera is about 2 weeks; with motion detection enabled it can be around 1–2 months, depending on activity.
1 pc Provision NVR5-8200X+(MM) 8‑channel NVR recorder
7 pcs Provision I2-320IPSN28-V2 cameras
7 pcs 10 m pre‑terminated IP camera cables
1 pc 8+2 channel SWITCH
Please also check our IP camera system category and browse our other ready‑made kits.
