DO NOT CHANGE
2 Megapixel Provision kit with 1 high-power LED array: 7 dome security cameras FULL HD 1920x1080 resolution, white outdoor metal housing, 8-channel 5 Megapixel NVR recorder, 10 m LAN cable, 8+2 port PoE switch. This security system is suitable for monitoring business premises, apartments and holiday homes in Full HD quality. The 7-dome IP camera system makes it possible to monitor large areas without signal loss.
Contents of the pre-assembled IP security camera system kit:
Can be easily mounted on walls or ceilings, with a metal housing that is ideal for outdoor use as well.
Thanks to the built-in IR LED, it provides visibility up to 20 m even in complete darkness. The 2.8 mm lens offers a 107° field of view, allowing you to cover a larger area with a single camera.
The Provision PR-NVR5-8200X+(MM) recorder can handle up to 8 5 Megapixel IP cameras. You can set up motion-triggered, cyclic or continuous recording modes. When connected to a monitor or TV you can view live footage. It also supports remote internet access via mobile app or computer. For video storage, the unit must be expanded with a hard drive (NOT INCLUDED), up to 6 TB capacity. If you purchase the hard drive from us, we will install it in the NVR free of charge.
The PoE switch is used to build the IP camera network. Connect the IP cameras and the NVR to it using the supplied cables. Thanks to PoE functionality, the cameras do not require separate power supplies, as they are powered directly by the switch. It has 10 ports in total: 8 for cameras, 1 for the router and 1 for the NVR.
The cable is delivered fully terminated; simply connect it to the NVR recorder and the camera. Each camera only needs 1 cable, as both video signal and power are transmitted over a single line. If 10 m is not enough, you can choose longer cables: 15 m or 20 m.
Assign a unique IP address to each IP camera and to the recorder within your own IP range (make sure no two devices share the same IP address, as this can cause conflicts). Connect the cameras and the recorder to the switch, then plug the devices into a power outlet using the supplied adapters. In the recorder’s menu, add the cameras one by one using automatic search or by entering the assigned IP addresses, then save the settings. The system is now ready for use.
Surveillance systems do not include built-in storage, so hard drives must be purchased separately / NOT INCLUDED! / for the recorder. If you buy the HDD from us, we will install and configure it in the device free of charge, so you do not have to deal with additional installation work or cost.
1000 GB HDD for recording
Approximate storage time with continuous recording for 1 camera is about 1 week; with motion detection enabled it can be up to around 2 months. NOT INCLUDED
2000 GB HDD for recording
Approximate storage time with continuous recording for 1 camera is about 2 weeks; with motion detection enabled it can be around 1–2 months. NOT INCLUDED
Please also check our IP camera system category and browse our other complete kits.
